Pack electronics by first photographing connections, backing up important data and matching every cable and accessory to its device. Use original boxes when available, or choose a sturdy padded box with cushioning that prevents movement without putting pressure on screens, ports or controls. Label each carton clearly, protect it from moisture and crushing pressure, and let cold equipment reach room temperature before powering it on.
Start with a five-minute electronics inventory
Before unplugging anything, create a simple record of what you own and how it is connected. This prevents missing accessories, makes reconnection faster and gives you a useful handoff note if a moving crew will handle the cartons.
- List each device, including its brand, model and serial number where useful.
- Photograph the front, back and existing marks of valuable equipment.
- Take clear photos of cable connections before removing anything.
- Back up computers, phones, tablets, game saves and other important data.
- Identify items that are unusually fragile, expensive, oversized or difficult to replace.
- Record which device belongs to each cable, remote, stand, adapter, screw and accessory.
Keep high-value electronics available for preparation rather than sealing them in advance. The Government of Canada pre-move booklet recommends making electronic equipment available for preparation and certification, recording high-value items on a high-value inventory, and considering professional packing for claim purposes. Ask your mover to explain its current packing and liability terms before booking.
A useful inventory can be as short as: “Living room TV, 65-inch, serial recorded, stand removed, two HDMI cables, remote, power cable, no visible damage.” Photograph the inventory and keep one copy on your phone and another with your move documents.
Choose the right box and cushioning
The best packaging for electronics holds the device firmly, cushions it on every side and does not press against a screen, button, vent or fragile port. Original manufacturer packaging is usually the easiest choice because its inserts match the device, but a strong replacement carton can work when the original box is gone.
| Device or situation | Preferred packaging | If the original box is missing |
|---|---|---|
| Television or large monitor | Original carton or purpose-built TV box with screen protection | Use a sturdy carton with padding on every side. Do not let cardboard or tape touch the screen directly. |
| Desktop computer or printer | Original carton with fitted inserts | Use a strong box with padding around the housing and extra protection for detachable parts. |
| Laptop, tablet or small console | Original carton inside a protective moving box when practical | Use a padded sleeve or wrap, then place it in a snug box with soft void fill. |
| Speakers and accessories | Small or medium sturdy cartons with paper or foam cushioning | Wrap each item separately and prevent heavy objects from pressing on cones, grilles or controls. |
Choose a box only somewhat larger than the item. A large carton filled with loose material lets electronics shift, while an undersized carton can transfer pressure to a screen or control panel. Reinforce the bottom with strong packing tape in an H-pattern, then add cushioning before placing the device inside. For a broader workflow, see packing electronics alongside other moving-box decisions.
Suitable cushioning includes packing paper, foam sheets, bubble wrap around the outside of a protected item, moving blankets and purpose-made inserts. Do not use loose peanuts or soft clothing as the only protection for a heavy device because they can compress and leave empty space around it.
The packing sequence that works for every device
To pack electronics safely, follow the same sequence every time: document, shut down, disconnect, separate, protect, cushion, box, label and stage.
1. Document and shut down
Save your connection photos and inventory entry before removing a cable. Shut the device down through its normal menu, wait until it is fully off, and unplug it. Do not pull cables by the wire, especially around HDMI, USB, network and power ports.
2. Remove detachable parts
Take off TV stands, monitor bases, removable printer trays, console accessories, external drives and other parts that can snap or bend during handling. Put screws and small fittings in a labelled resealable bag. Do not force a part that is not designed to come off.
3. Protect the device
Cover screens with a clean, soft layer that will not scratch the surface, then add a rigid outer layer such as a suitable screen protector, foam board or manufacturer insert. Wrap the housing separately. Keep tape, rubber bands and stretch wrap away from screens, vents, buttons and delicate finishes.
4. Cushion the box
Line the bottom and sides of the carton before placing the device inside. Add cushioning above and around it so the item cannot slide, but do not compress the screen or force the lid closed.
5. Seal and label
Seal the top with strong tape. Write the room, device, box number and orientation on at least two sides. For example: “Living room, TV, 1 of 1, keep upright.” A label does not replace proper internal protection.
6. Stage the box safely
Keep packed electronics off damp floors, away from radiators and out of walkways. Do not stack heavy cartons on boxes containing screens, laptops or consoles.
For static-sensitive components, hold circuit boards and computer parts by their edges, avoid placing them directly on carpet, and use an anti-static bag when the part came with one. Packaging reduces risk but does not eliminate damage from impact, moisture, static or pressure.
How to pack each type of household electronics
Different devices fail in different ways. A screen needs surface and edge protection, a desktop computer needs support around its housing and internal components, and a router needs its power supply and network cables matched correctly.
Televisions
Remove the stand if the design allows it and bag the screws with the TV’s inventory number. Photograph the back connections, protect the screen with the original insert or a clean soft layer plus rigid protection, then place the television in its original carton or a purpose-built TV box.
Transport a television upright whenever the packaging and equipment allow it. Keep it away from heavy items, sharp edges and anything that can fall against the panel. Pack the stand separately, never loose against the screen.
Desktop computers and monitors
Photograph the rear of the computer and label each monitor before disconnecting it. Remove monitor stands where practical, coil cables loosely, and place each display in a padded carton with its own divider or cushioning. Keep the computer tower upright if that is how it normally sits.
If the desktop contains a large removable graphics card or other component identified by the manufacturer as removable for transport, follow the relevant manual. Otherwise, do not open the case simply because you are moving it. Keep external drives and important data backups with you instead of placing the only copy in the truck.
For a two-monitor home office, number the devices “D1” and “D2,” then label each video cable with the same number. Put both monitor stands, screws and power cables in a bag marked “D1 and D2 monitor parts,” and photograph the completed setup before disconnecting it.
For several screens or workplace devices, see packing monitors and electronics for additional guidance on padded boxes, removable parts, labels and cable control.
Laptops and tablets
Shut the laptop or tablet down completely instead of leaving it in sleep mode. Use its original sleeve or carton when available, then place it in a padded case or snug box. Keep the charger, docking adapter and mouse in a labelled bag, without letting them press against the screen.
Carry a laptop, tablet or phone containing essential data with you when practical. If it will travel with the moving load, tell the mover that it is fragile and high value, and confirm handling and coverage terms before the move.
Printers and scanners
Remove paper, ink or toner cartridges when the device manual permits it, and place them in sealed bags to contain leaks. Secure moving parts according to the manufacturer’s instructions, remove detachable trays, and cushion the device upright in a strong box.
Gaming consoles and controllers
Remove discs, cartridges and detachable storage devices. Wrap the console and controllers separately, protect the disc drive and ports from impact, and pack games in a smaller carton so they cannot become loose projectiles.
For a complete gaming setup, label the console “G1,” the controller bag “G1 accessories” and each HDMI or power cable “G1.” Photograph the connection to the television and network before unplugging it.
Speakers and audio equipment
Wrap speakers individually and protect grilles, cones, knobs and switches from direct contact with other objects. Use dividers for pairs. Label left and right speakers, amplifiers, remotes and cables, and keep heavier amplifiers at the bottom of a well-cushioned carton.
Routers, modems and networking equipment
Photograph the port arrangement and label the power adapter, modem cable, Ethernet cables and mesh-unit locations. Pack each unit in a small padded box or protected section of the accessory carton. Do not mix similar power adapters without labels.
If internet access is essential immediately after arrival, place the modem, router, power supplies and one labelled Ethernet cable in a clearly marked “connect first” box.
Match every cable, remote and adapter before sealing the box
Give every major device a short label such as TV1, PC1, MON1 or WIFI1, then use that code on the device carton, power cable, signal cable, remote and parts bag.
- Photograph the connected device from the back.
- Place a small label on both ends of each removable cable.
- Put screws, stands, remotes and adapters in one resealable bag for that device.
- Write the device code and destination room on the bag.
- Store labelled bags in one accessory box, with a written list taped to its lid.
For a living-room TV, use labels such as TV1 power, TV1 HDMI-1, TV1 soundbar and TV1 remote. For home Wi-Fi, label the modem, router, mesh points and each power adapter by location.
Do not tape accessories directly to a screen or delicate device. Place the labelled bag beside the device only when it cannot move into the screen or controls.
Prepare electronics for moving day
Before the crew arrives, consolidate packed electronics in a dry area where they can be counted. Tell the movers which cartons contain screens, computers, high-value items or equipment requiring special positioning. Keep an inventory of the box count and photograph any pre-existing mark before loading.
Electronics should be protected from crushing pressure, moisture, loose loads and shifting. Screens are generally best kept upright when their packaging supports that position. Never place a heavy box on top of a screen carton.
Give the crew a short handoff note containing:
- The number of electronics cartons and their box numbers.
- Which items contain screens, computers, drives or delicate controls.
- Any visible marks or damage recorded before loading.
- Which items you plan to carry personally.
- Any unusually shaped, very heavy or especially valuable equipment.
- Pickup and delivery access details, including stairs, elevators, narrow routes and parking limits.
- Questions about packing scope, handling and coverage that need an answer before loading.
Let's Start Moving is a licensed and insured Ottawa moving company providing residential, commercial, packing and long-distance moving support. Include your electronics inventory and handling concerns when requesting an estimate. Related reading: Moving in Bad Weather: When to Go and When to Wait.
Unpack in the right order and let cold equipment acclimate
Inspect each carton before opening it, photograph visible damage and compare the contents with your inventory. Reconnect essential equipment in this order: internet modem and router, work computer, primary display, phone chargers, security or accessibility devices, then entertainment equipment.
If electronics have been exposed to Ottawa winter temperatures, let them reach room temperature before switching them on. Condensation can form when a cold device enters warm indoor air, so do not rush the power-up. Follow the device manual for model-specific instructions.
Open one device carton at a time and keep its labelled accessory bag beside it. Use connection photos to restore cables, check ventilation openings and inspect ports before plugging anything in. If a device smells burnt, has visible moisture, a cracked case or a damaged power cable, leave it disconnected and seek model-specific service advice.
For a laptop, shut it down, protect it in a padded sleeve or original carton, label the charger and carry it personally when it contains essential or irreplaceable data. Backups still matter because physical protection cannot prevent every loss.
Electronics packing checklist
Materials
- Original cartons and inserts, where available.
- Sturdy cartons sized for the devices.
- Strong packing tape and a marker.
- Packing paper, foam sheets, screen protection and moving blankets.
- Resealable bags for cables, screws, remotes and adapters.
- Labels or coloured tape for device codes.
- Anti-static bags for compatible computer components.
- Phone or camera for inventory and connection photos.
Before packing
- Back up important files and game data.
- Record model and serial details for valuable equipment.
- Photograph condition and cable connections.
- Shut devices down normally and disconnect them carefully.
- Remove discs, cartridges, trays, stands and other detachable parts.
- Ask the moving company about unusual, high-value or fragile items before booking.
Before powering up
- Check cartons and devices for impact, moisture or visible damage.
- Let cold equipment reach room temperature.
- Match each accessory bag to its device code.
- Reconnect internet and essential work equipment first.
- Keep ventilation openings clear.
- Test devices one at a time and record any issue promptly.
Equipment that is no longer worth moving should be handled through an appropriate recycling route. See this guide to electronic scrap recycling and data safety before packing unwanted devices.
Choose the right level of help for your electronics
Self-packing suits a small number of ordinary devices when you have the time, materials and original packaging. Partial professional packing can help with screens, a home office or a gaming setup while you pack everyday items yourself. Full packing support is worth discussing when you have many devices, limited time, difficult access, valuable equipment or no suitable cartons.
Before requesting a quote, send the device list, photos of unusual items, pickup and delivery addresses, access details, move date and the level of packing help you want. Ask Let's Start Moving what quoting options are available for your packing needs and describe any electronics that require special handling.
